The Universe of Surface Treatments for Precision Industrial Tooling

The range of processes used to treat the surfaces of engineered materials is quite wide and the results vary on a number of different factors, including the process, the coating media and the substrate surface. If the universe of surface treatments were to be categorized according to two criteria – the first being that the metallurgy produced by the process is equivalent and the second being that the equipment used to implement the process is related – then all surface treatments can be classified into one of six categories:

Heat Treatments –

Heat treatments affect the entire volume of the substrate material and extend to the surface region. Heat treatments can be performed either in air or in a vacuum chamber.

Case Hardening Processes -

Case hardening processes produce a hardened case layer INSIDE of the surface of a substrate by thermally-driven diffusions of species, such as C, N, or B. The case hardening process can be implemented in a salt bath at atmospheric pressure, an elevated pressure chamber (gas nitriding, carburizing) or a vacuum chamber (ion nitriding, carburizing).

Chrome Plating, Conversion Coating & Anodizing Processes -

Chrome plating, conversion coating and anodizing processes are used to deposit coatings ON the substrate surface, rather than inside it. They are all chemical processes implemented in an aqueous media contained in a tank at atmospheric pressure. A wide variety of metallic and metallic oxide coatings can be deposited.

Plasma Spraying -

Plasma spraying is used to build thick coatings ON the substrate surface and there is always a distinct interface between the coating and the substrate. Plasma spraying can be done in air at atmospheric pressure or in a low-pressure chamber and is usually used to deposit thick metallic or oxide coatings.

Physical Vapor Deposition (PVD) Coatings -

Physical vapor deposition is used to deposit thin hardcoatings ON the substrate surface. A limited variety of metallic nitride, carbide, oxide and diamond-like carbon coatings can be deposited. A vacuum environment is required.

Ion Beam Enhanced Deposition (IBED) Coatings -

Unlike all conventional treatments, IBED is a physical – as opposed to a chemical or thermal – process. The temperature rise during processing can be held below 200 degrees Fahrenheit so no thermally-induced volumetric changes in bulk properties or physical dimensions are produced. IBED processing combines the benefits of thermal diffusion processing and conventional coating technologies because the coating atoms first penetrate into the substrate to form a case layer in the surface, and then are grown out from this case layer as a thick coating. Driven in kinetically instead of thermally, IBED coatings are “ballistically bonded” to the substrate, thus forming a metallurgical bond that is much stronger than a mechanical or Van der Waals bond. And because the IBED process is kinetically driven, solid solubility limits can be exceeded which is the mechanism that allows deposition of a variety of types of coatings on virtually any substrate material.

About the Author

Dr. Deutchman is currently Chairman and Director of Research and Development at Beamalloy Technologies, LLC where he is directly involved with the research, development, and application of the Beamalloy patented IBED coating process. He is the author of numerous articles published in a variety of scientific and trade journals, holds numerous patents, and lectures widely on surface engineering.

2008 Lenox Industrial Tools 301 Finish

Northern Industrial Steel Wall-Mounted Tool Cabinet #3502S041 $70.00

FREE SHIPPING-Northern Industrial Hammer Drill-Tool Only 18V #NTECHD18C $58.99

Northern Industrial Tools Double Action Air Brush #A01-025-0004 $47.99

New Silver Business Industrial Silver Color Tweezer Maintenance Tool Tweezer $1.99

Dexter EXTENSION BLADE HANDLE 070060 34SE Industrial Cutting Tool $2.99

Hardware Tool Wrench Long Handle 23 1/4″ Industrial Black 12-PT $9.99

Northern Industrial Tools Platform Truck — 600-Lb. Capacity, 24in. x 35in $54.99

Lot of 12 Dexter Russell 60040 Rubber Knives Industrial Cutting Tools NEW $12.50

Northern Industrial Tools Socket Set-9-pc 3/8in Drive SAE Sizes #63713 $7.59

Michigan Industrial Tools 3/8″ Dr 7Pc Extra Long Hex Bit Socket Set Metric $32.99

antique vintage industrial retro spark plug gap gage wrench tool compartment $9.99

Vintage Rustic Country Primitive Wire”EGG GATHERING BASKET” Farm/Industrial Tool $26.00

Northern Industrial Tools Little Digger Sandlot Toy Model# 2811S011 $24.99

Industrial Borescope all in 1 inspection tool LIGHTS UP $225.00

SS PRODUCTS ER-16 COLLET Choose Any ONE! INDUSTRIAL SHOP CUTTING TOOLS ENDMIL $18.75

Vintage Industrial Threading Tool Wood Tray Iron Age Russell MFG $24.99

24 NEIKO TOOL USA TITANIUM INDUSTRIAL DRILL BITS 1/8″ $3.99

PAINT GUN AIR COMPRESSOR REGULATOR/TOOLS/AUTOMOTIVE/INDUSTRIAL.. $25.00

Daddy’s Lunch Box Set Machinist Tool Work Bucket Caddy Industrial! FREE SHIP USA $30.00

Northern Industrial Tools Hand Truck-1000-lb Cap P-Handle #144513 $84.99

Northern Industrial Tools Auto Body Shaping Kit-7-pc Set #2202S078 $27.99

Northern Industrial Tools Bench-Mount Chain Breaker #2504S049 $49.99

CLARK FORKLIFT MECHANICS OR FORKLIFT OPERATOR HAT../TOOLS/INDUSTRIAL.. $10.00

LIGHT DUTY INDUSTRIAL FAULTLESS ALBION CASTERS TOOL 5″ $2.49

STANLEY VIDMAR 11 DRAWER INDUSTRIAL TOOL CABINET BOX $1,199.99

CALTERM INDUSTRIAL WIRING MULTI-TOOL $12.00

OTM DR 3.875 INSERT DRILL MACHINIST TOOLING MACHINE SHOP TOOLS 3 7/8 INDUSTRIAL $399.99

MICHIGAN INDUSTRIAL TOOLS TEKTON 4′ X 6′ SILVER TARP $0.49

Northern Industrial Air Tool Kit-50-pc Set #A01-028-0043 $92.99

Northern Industrial Tools Cable Ties-11in Size 1000-Pk. #F01-033-0029 $33.99

Northern Industrial Air Cutoff Tool #139274 $14.99

Northern Industrial Tools-123-pc Set #2209S115 $79.99

Northern Industrial Fishing Tool Combo-3-pc Set #3703S018 $5.00

Northern Industrial Tools Cable Ties-7in Size 1000-Pk. #F01-033-0028 $16.99

Northern Industrial Tools Cable Ties-5in Size 1000-Pk. #F01-033-0005 $10.99

Northern Industrial Tools w/Toolbox-46-pc Set #2209S119 $37.99

NEW Lenox Industrial Tools 12123 R1 PVC Cutter Upto 1 58 Inch Ratcheting Cut $77.13

2 PCS DA100 COLLET CHUCKS MACHINIST TOOLING MACHINE SHOP TOOLS INDUSTRIAL $49.99

1 1/2 12 NF H4 HSS 6 FLUTE TAP MACHINIST TOOLING MACHINE SHOP TOOLS INDUSTRIAL $59.99

HPS IMPERATOR MACHINE TOOL INDUSTRIAL CONTROL TRANSFORMER PH50MQMJ (NIB) $24.99

1″ 8 NC HS G H4 4 FLUTE TAP USA MACHINIST TOOLING MACHINE SHOP TOOLS INDUSTRIAL $39.99

LOCKOUT HASP 1.5 INCH INDUSTRIAL PACK OF 12 HASP TOOLS (ABUS ST0802) $35.88

1960′s Kent-moore Service Tools Industrial Edition $19.96

4” Industrial LINESMAN Highline Overhead VAC TOOL $179.00

Bulova Watch Parts Cabinet Steel Industrial Tool Jewelry Chest $79.95

XML Hacks: 100 Industrial-Strength Tips and Tools $7.05

Vintage Steel Double Sheave Barn Pulley Industrial Pulley Old Farm Tool $9.95

Try Benson First: Industrial Supplies, Cutting Tools, $150.00

Irwin Industrial Tools 4935059 Metric Alignment Dies 3mm to 12mm $18.95

40pc Industrial S2 Power Hex Spline Torx Socket Bit Set Power Tools Bits $35.85

PORTABLE INDUSTRIAL HAND LARGE MANUAL METAL PIPE BENDER TOOL KIT 8 DIES $189.99

Heavy Duty Air Blow Gun Rubber Tip Industrial Tools Auto Engine Cleaning Blower $12.40

NEW Irwin Industrial Tools 26317 Metric Tap and Hex Die Set 41 Piece $166.52

4 TIX Nascar Sprint Cup Series: Lenox Industrial Tools 301 7/15 New Hampshire $530.00

GERBER DIESEL BLACK INDUSTRIAL STRENGTH MULTI TOOL $49.99

10mm Diameter Industrial Twist Drill Bit Tool Metal $3.71

Irwin Industrial Tools 3046015 3-5/8-Inch 3-Cutter Self $50.00

Drill / Reamer-Aircraft,Aviation,Machinist,Industrial Tools $9.95

ANTIQUE ART DECO INDUSTRIAL CHASE BOOKENDS MODERN COPPER BRASS BOOK TOOL ENDS $595.00

1 Drawer Vtg Loft Machine Industrial Age Small Metal File Parts Cabinet Tool Box $9.99

HANSON Irwin Hex Die 1-7/16″ Across 3/4-10 NC Industrial Tool Machine Die 6858 $14.99

US Industrial tool 2X rivet gun $39.99

HANSON Irwin Hex Die 1-7/16″ Across 3/4-16 NF Industrial Tool Machine Die 6860ZR $15.49

US Industrial tool 4X rivet gun $49.99

HANSON Irwin Hex Die 1-7/16″ Across 3/8-18 NPT Industrial Tool Machine Die 7004 $19.99

HANSON Irwin Hex Die 1-7/16″ Across 5/8-11 NC Industrial Tool Machine Die 6852 $14.99

US Industrial tool 1X rivet gun $39.99

HANSON Irwin Hex Die 1-7/16″ Across 5/8-18 NF Industrial Tool Machine Die 6854 $15.99

HANSON Irwin Hex Die 1-7/16″ Across 9/16-18 NF Industrial Tool Machine Die 6849 $14.99

Drill Block Index Measuring Machinist Industrial Shop Tool Holder ((( Misc ))) ? $15.00

HANSON Irwin Hex Die 1″ Across 4-40NC Industrial Tool Machine Die 9312 FREE SHIP $10.99

HANSON Irwin Hex Die 1″ Across 6-32NC Industrial Tool Machine Die 9318 FREE SHIP $11.99

KORLOY 3″ CUTTER WITH 30 INSERTS NEW INDUSTRIAL SHOP CUTTING TOOLS ENDMILL $476.25

HANSON Irwin Hex Die 1″ Across 8-32NC Industrial Tool Machine Die 9324 FREE SHIP $11.99

New HANSON Irwin Hex Die 1″ Across 10-24NC Industrial Tool Machine Die 9328 NIP $10.99

New HANSON Irwin Hex Die 1″ Across 10-32NF Industrial Tool Machine Die 9331ZR $10.99

New HANSON Irwin Hex Die 1″ Across 12-24NC Industrial Tool Machine Die 9332ZR $10.99

NEW Irwin Industrial Tools 1922 Hex Rethreading Die Set 6 Piece $126.96

New HANSON Irwin Hex Die 1″ Across 14-20NS Industrial Tool Machine Die 9335ZR $10.99

VTG Retro Art Deco Metal Industrial Tool Cabinet, File box Drawers $76.99

Presto 3510 FlipSide Belgian Waffle Maker $35.70 PRESTO 03510 WAFFLE MAKER BELGIAN 1350W. The professional-style rotating design bakes extra-thick Belgian waffles in minutes.The unique 180 flip design evenly spreads the batter for waffles with a crispy outside and fluffy, tender inside.Countdown timer and digital display signals when baking time is up.Easy to store! Dual function base locks in a vertical position for compact storage.1-year limit…

OXO Salad Spinner The OXO GOOD GRIPS Salad Spinner family is growing! The Little Salad & Herb Spinner, a small version of our big Spinner, is perfect for drying salad for two, herbs or berries. The Little Spinner features our patented pump mechanism that makes it easy to spin salad by simply pressing the soft knob. Our patented brake lets you stop the basket to unload it, and a non-slip ring keeps the bowl steady o…

Thermos Stainless King SK3000MBTRI4 Food Jar, Midnight Blue $18.99 There’s nothing quite like a nice hot meal after a long day hike. The Thermos® insulated food jar with spoon provides both storage for your dinner and a functional place from which to eat it! TherMax® double-wall vacuum insulation ensures temperature retention for hot or cold foods….

Opiate $7.82 As the title of Tool’s 1992 debut implies, they’re none too impressed by religion, though other targets–fear (“Cold and Ugly”), hypocritical moralizing (“Jerk-Off”), nonconformity (“Hush”)–get their time in the spotlight as well. Opiate is a collection of heavy, aggressive, cynical music (though the tail end of the title track sounds more like acid rock), packaged in songs noticeably shorter tha…

Decor Grates ST212 Scroll Floor Register, Textured Black, 2-Inch by 12-Inch $10.99 Decorative register covers are a great way to finish off a room and show that you care about the details in your home….

error 256 ep $10.99 Recommended if you like Tool, The Gathering. TRACK LISTING: learned my lesson – non fiction – swarm – learned my lesson error 256 remix:…

Q38 Hand/Power Tool Safety Video-Industrial ShopVHS Edition $25.00 This program discusses matching the right tool to the job and tool safety practices. It also describes how materials cause accidents and anticipating hazards and chemical splashes. ALSO AVAILABLE CALL CUSTOMER SUPPORT TO ORDER POSTER & 15 EMPLOYEE BOOKLETS…

David Lynch The Lime Green Set $179.99 DAVID LYNCH:LIME GREEN SET – DVD Movie…

Product Design Rendering Essentials: Lighting and Shading in Studiotools $59.00 StudioTools is a workhorse application for many industrial designers, but much of its functionality is buried within complex option windows and cryptically named settings. In this DVD, industrial designer Dustin Brown demystifies the rendering process in StudioTools. He covers not only critical settings within the software, but also presents his unique approach to planning, lighting and shader cre…

Industrial Design Techniques with Henry Goecke. Modeling Essentials with Studiotools. $51.94 The knowledge and understanding of NURBS based 3D design modeling is a crucial step in the mastery of modern design and production techniques. StudioTools is an industry standard program that helps release your creative ideas. Henry lays the foundation needed to understand this program s rich and detailed features. Methods are covered in detail and the curves you need to create the example model a…

Worklight Michigan Industrial Tools Worklight 6122 $41.72 MICHIGAN INDUSTRIAL TOOLS TEKTON CORDLESS WORK LIGHT — 20 x 11 x 5 in.; Includes rechargeable long-lasting nickel-metal hydride 12V batteries, two hooks stand-up magnetic base, and magnetic handle; Features 50 bright white LED bulbs that provide brilliant, focused illumination, three-way power-saving switch that lets you use 50 LEDs for maximum illumination or 10 or 30 LEDs for extended run time, and flex head flares that flexes 25 degrees forward and 25 degrees backward to direct the light right where you want it; Ideal for any work area, roadside or power outage emergency, and campsite.. Auto Parts Warehouse has extensive Michigan Industrial Tools Worklight catalogs.We are now offering FREE shipping on all Michigan Industrial Tools Worklight orders over $50.00. Our secure michigan industrial tools worklight catalog is available every hour of everyday. Shop with confidence for all your michigan industrial tools worklight needs. Michigan Industrial Tools Worklight are In Stock and available today. Save up to 60% off dealer price on your next Michigan Industrial Tools Worklight purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

NASCAR Sprint Cup Series: LENOX Industrial Tools 301 Tickets $74 Buy NASCAR Sprint Cup Series: LENOX Industrial Tools 301 tickets. TicketNetwork.com gets you in!

Body Hammer Michigan Industrial Tools Body Hammer 5656 $27.72 MICHIGAN INDUSTRIAL TOOLS TEKTON 7-PIECE AUTO BODY REPAIR KIT — Includes 3 pieces of standard bumping, reverse-curve, and pick-end finishing hammers and 4 pieces of curved, utility, double-end, and heel dollies; Features drop forged, heat treated steel heads and dollies, precision-ground and polished faces, and kiln-dried natural hardwood handles; Reshapes damaged body panels to original contour.. Auto Parts Warehouse has extensive Michigan Industrial Tools Body Hammer catalogs.We are now offering FREE shipping on all Michigan Industrial Tools Body Hammer orders over $50.00. Our secure michigan industrial tools body hammer catalog is available every hour of everyday. Shop with confidence for all your michigan industrial tools body hammer needs. Michigan Industrial Tools Body Hammer are In Stock and available today. Save up to 60% off dealer price on your next Michigan Industrial Tools Body Hammer purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

Coil Spring Compressor Michigan Industrial Tools Coil Spring Compressor 5737 $25.48 MICHIGAN INDUSTRIAL TOOLS TEKTON COIL SPRING COMPRESSORS, SET OF 2 — 105,000 psi minimum bolt tensile strength; Made of drop forged, heat-treated and chrome-plated carbon steel; Features heavy duty cast steel arms, precision-machined hardened steel center screws, and uncoated, extra-wide 3 in. dual claws that maintain spring curvature necessary to seat springs; Allows you to remove and install springs quickly and safely when repairing struts; Fits most common spring sizes.. Auto Parts Warehouse has extensive Michigan Industrial Tools Coil Spring Compressor catalogs.We are now offering FREE shipping on all Michigan Industrial Tools Coil Spring Compressor orders over $50.00. Our secure michigan industrial tools coil spring compressor catalog is available every hour of everyday. Shop with confidence for all your michigan industrial tools coil spring compressor needs. Michigan Industrial Tools Coil Spring Compressor are In Stock and available today. Save up to 60% off dealer price on your next Michigan Industrial Tools Coil Spring Compressor purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

Punch Set Michigan Industrial Tools Punch Set 6588 $18.72 MICHIGAN INDUSTRIAL TOOLS TEKTON HOLLOW PUNCH SET, SET OF 12 — 1/8 in., 5/32 in., 3/16 in., 7/32 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., and 3/4 in. hollow punches complete with organizer storage pouch; Made from heat treated, high carbon steel with silver finish; Features non-slip knurled handle grip, precision ground flutes, and cutting edges; Cuts clean holes in gaskets, leather, rubber, cardboard, and other soft materials.. Auto Parts Warehouse has extensive Michigan Industrial Tools Punch Set catalogs.We are now offering FREE shipping on all Michigan Industrial Tools Punch Set orders over $50.00. Our secure michigan industrial tools punch set catalog is available every hour of everyday. Shop with confidence for all your michigan industrial tools punch set needs. Michigan Industrial Tools Punch Set are In Stock and available today. Save up to 60% off dealer price on your next Michigan Industrial Tools Punch Set purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

Lenox Industrial Tools 301 – NASCAR $88 New Hampshire International Speedway (1122 Rt. 106 N. , Loudon, NH, 03307)

General Tools 410 Narrow Sharp Point Industrial Tweezers $7.05 General Tools 410 Narrow Sharp Point Industrial Tweezers General’s vast tweezer collections are precision engineered to withstand rigorous use without sacrificing their acute accuracy. As such, they are a popular choice for toolmakers, mechanics, electronic assemblers and repairmen. We offer 10 distinct styles of Industrial and Utility Tweezers for a limitless number of uses. General Tools 410 Narrow Sharp Point Industrial Tweezers Features: Sharp, narrow point style 4-1/4” overall length Great for professionals, craftspeople and hobbyists. Industrial tweezers Ideal for professionals, craftspeople and hobbyists Sharp narrow point style 4-1/4″ Carded

General Tools 408 Sharp Bent Point Industrial Tweezers $7.75 General Tools 408 Sharp Bent Point Industrial Tweezers General’s vast tweezer collections are precision engineered to withstand rigorous use without sacrificing their acute accuracy. As such, they are a popular choice for toolmakers, mechanics, electronic assemblers and repairmen. We offer 10 distinct styles of Industrial and Utility Tweezers for a limitless number of uses. General Tools 408 Sharp Bent Point Industrial Tweezers Features: Sharp, curved point style 4-1/4” overall length Great for professionals, craftspeople and hobbyists. Industrial tweezers Ideal for professionals, craftspeople and hobbyist Sharp curved point 4-1/4″ Carded

General Tools 403 Blunt Serrated Point Industrial Tweezers $8.1 General Tools 403 Blunt Serrated Point Industrial Tweezers General’s vast tweezer collections are precision engineered to withstand rigorous use without sacrificing their acute accuracy. As such, they are a popular choice for toolmakers, mechanics, electronic assemblers and repairmen. We offer 10 distinct styles of Industrial and Utility Tweezers for a limitless number of uses. General Tools 403 Blunt Serrated Point Industrial Tweezers Features: Blunt point style with serrated jaws 6” overall length Great for professionals, craftspeople and hobbyists. Nickel plated tweezers for toolmakers, repairmen, electronic assemblers, and other professionals Blunt serrated point style 6″ length Carded

Cooper Hand Tools Wiss® – Inlaid® Industrial Shears $25.5 New lower ring designed scissors for added comfort. 8-1/2″ INLAID BLADE SHEAR. Scissors and snips with hot drop-designed commercial finish. Mostly suitable for the poultry industry. Newly designed bigger, lower ring to increase ease. Hand tools with SET-EASY® pivot.

Innovation in Industrial Research $29.87 Innovation in Industrial Research gives new and experienced researchers insight into how they can improve the quality of their industrial research. It discusses the methods currently available to researchers, from quality tools to the scientific method, K

Construction Management for Industrial Projects $145.6 This book presents techniques for effective and successful project management across all phases of the project, covering all of the management tools and leadership skills for any industrial project. It presents advanced modern tools for use by management

Cooper Tools 0390MC 36 Industrial Grade, Center Cut Cutter $128.58 Cooper Tools 0390MC 36″ Industrial Grade, Center Cut Cutter Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell chain, Crescent brand wrenches and pliers, Lufkin measuring tools, Nicholson files and saws, Plumb hammers, H.K. Porter bolt cutters, Weller soldering products, and Wiss snips. Cooper Tools 0390MC 36″ Industrial Grade, Center Cut Cutter Features: General plant maintenance tool Drop-forged, precision ground, alloy tool steel jaws, center-cut blades Cuts soft, medium, or hard materials Maximum hardness of material to be cut: Brinell 455/Rockwell C48 Lockplate keeps jaws from loosening Toggle joints turn 50 lb hand pressure to 4000 lb cutting pressure Screw-type adjustment realigns edges Steel handles with rubber grips Replacement cutterhead: 0313C NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cooper Tools 0390MC 36″ Industrial Grade, Center Cut Cutter Specifications: UPC Code: 37103909336 Weight/Length: 12 7/8 lbs./36 in. Handle Material: Tubular Steel Jaw Design/Cutting Blade: All Purpose/Center Cut Replacement Cutterhead/Jaws: 0313C Capacity: See Tech Specs Link Below Material Hardness: See Tech Specs Link Below Brinell/Rockwell: See Tech Specs Link Below Packaging: Industrial Box/Carton Precision cutting edges Cutting jaws alloy tool steel, drop forged, precision ground for maximum wear resistant and longer cutting life Lockplate prevents jaw bolts from turning or loosening One adjustment realigns cutting edges properly Toggle joint transforms 50 lbs of hand pressure on handles to 4,000 lbs pressure on cutting edges of jaws

Cooper Tools 0090MC 18 Industrial Grade Center Cut Cutter $77.01 Cooper Tools 0090MC 18″ Industrial Grade Center Cut Cutter Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell chain, Crescent brand wrenches and pliers, Lufkin measuring tools, Nicholson files and saws, Plumb hammers, H.K. Porter bolt cutters, Weller soldering products, and Wiss snips. Cooper Tools 0090MC 18″ Industrial Grade Center Cut Cutter Features: General plant maintenance tool Drop-forged precision ground alloy tool steel jaws w/ center-cut blades Cuts soft, medium, or hard materials Maximum hardness of material to be cut: Brinell 455/Rockwell C48 Lockplate keeps jaws from loosening Toggle joints turn 50 lb hand pressure to 4000 lb cutting pressure Screw-type adjustment realigns edges Steel handles with rubber grips Replacement cutterhead: 0013C NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cooper Tools 0090MC 18″ Industrial Grade Center Cut Cutter Specifications: UPC Code: 37103905529 Weight/Length: 3 1/2 lbs./18 in. Handle Material: Tubular Steel Jaw Design/Cutting Blade: All Purpose/Center Cut Replacement Cutterhead/Jaws: 0013C Capacity: See Tech Specs Link Below Material Hardness: See Tech Specs Link Below Brinell/Rockwell: See Tech Specs Link Below Packaging: Industrial Box/Carton Precision cutting edges Cutting jaws alloy tool steel, drop forged, precision ground for maximum wear resistant and longer cutting life Lockplate prevents jaw bolts from turning or loosening One adjustment realigns cutting edges properly Toggle joint transforms 50 lbs of hand pressure on handles to 4,000 lbs pressure on cutting edges of jaws

Cooper Tools 0190MC 24 Industrial Grade Center Cut Cutter $88.5 Cooper Tools 0190MC 24″ Industrial Grade Center Cut Cutter Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell chain, Crescent brand wrenches and pliers, Lufkin measuring tools, Nicholson files and saws, Plumb hammers, H.K. Porter bolt cutters, Weller soldering products, and Wiss snips. Cooper Tools 0190MC 24″ Industrial Grade Center Cut Cutter Features: Recommended for the most demanding hand cutting applications Heavy-duty straps support the jaws Maximum hardness of material to be cut: Brinell 455/Rockwell C48 Lockplate keeps jaws from loosening Toggle joints turn 50 lb hand pressure to 4000 lb cutting pressure Screw-type adjustment realigns edges Available with tubular steel or lightweight, fiberglass handles Replacement cutterhead: 0113C NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cooper Tools 0190MC 24″ Industrial Grade Center Cut Cutter Specifications: UPC Code: 37103907134 Weight/Length: 5 1/4 lbs./24 in. Handle Material: Tubular Steel Jaw Design/Cutting Blade: All Purpose/Center Cut Replacement Cutterhead/Jaws: 0113C Capacity: See Tech Specs Link Below Material Hardness: See Tech Specs Link Below Brinell/Rockwell: See Tech Specs Link Below Packaging: Industrial Box/Carton Precision cutting edges Cutting jaws alloy tool steel, drop forged, precision ground for maximum wear resistant and longer cutting life Lockplate prevents jaw bolts from turning or loosening One adjustment realigns cutting edges properly Toggle joint transforms 50 lbs of hand pressure on handles to 4,000 lbs pressure on cutting edges of jaws

Jackson® Professional Tools – Forged Steel Blade Industrial Rakes $79.4 Best choice for industrial rakes. Forged steel blade industrial rakes have seal-coated white ash handle for strength and longer life Equipped with chrome steel ferrule for superior strength With straight tine and blade shape Hand tool with straight handle type

Industrial America $31.72 Concise, easy-to-read introductions to various topics in U.S. history use primary documents and photography, as well as timelines, maps, and other tools, to teach important facts about our past.

Cooper Hand Tools 20N Steel 10-1/4 Heavy Duty Inlaid Industrial Shears $30.11 Cooper Hand Tools 20N Steel 10-1/4″ Heavy Duty Inlaid Industrial Shears Cooper Hand Tools 20N Steel 10-1/4″ Heavy Duty Inlaid Industrial Shears Features: Shears Sharp point Industrial size and strength Finest quality cutlery steel Hot drop forged polished blades Patented SET-EASY pivot 4-3/4″ blade length 11″ tool length

Cooper Hand Tools 22N Steel 12-1/4 Heavy Duty Inlaid Industrial Sheers $33.1 Cooper Hand Tools 22N Steel 12-1/4″ Heavy Duty Inlaid Industrial Sheers Cooper Hand Tools 22N Steel 12-1/4″ Heavy Duty Inlaid Industrial Sheers Features: Sheers Sharp point Industrial size and strength Finest quality cutlery steel Hot drop forged polished blades Black handles 5-5/8″ blade length 12-5/8″ tool length

Central Tools 3S600 Lighted Industrial Tweezer Set $21.93 Features and Benefits: Stainless steel construction for durability 3 styles to choose from Each unit has its own light Includes 9 extra batteries Comes complete in a case Retrieve lost parts in dark, tight places. Three different configurations to meet a wide range of needs.

Central Tools CEN3S600 Lighted Industrial Tweezer Set $33.74 Features and Benefits:. Stainless steel construction for durability. 3 styles to choose from. Each unit has its own light. Includes 9 extra batteries. Comes complete in a case. Retrieve lost parts in dark tight places. Three different configurations to meet a wide range of needs.

NASCAR Sprint Cup Series: LENOX Industrial Tools 301 Tickets 2012-07-15 Loudon, NH, New Hampshire Motor Speedway $74 Buy NASCAR Sprint Cup Series: LENOX Industrial Tools 301, tickets. Tickets for 07/15/2012 at New Hampshire Motor Speedway in Loudon, NH are available. TicketNetwork.com gets you in!

Kurt Busch – 2008 Lenox Industrial Tools 301 Winner – Framed 6×8 Photograph with Race Used Tire Piece $50 Kurt Busch earned his first win of the season at the 2008 Lenox Industrial Tools 301 at New Hampshire International Speedway. This framed collectible features a glossy 6×8 photo and an actual piece of race-winning tire from the #2 Miller Lite Dodge at the 2008 Lenox Industrial Tools 301 on June 29- 2008. Limited edition of 302. Comes with a statement of authenticity from Penske Racing and Mounted Memories for the race tire piece. Framed dimensions: 12″x14″.

Ryan Newman Sublimated 12×15 Plaque Details: 2011 New Hampshire Lenox Industrial Tools 301, &quotI WAS THERE&quot $44.99 Commemorate Ryan Newman’s victory during the 2011 Lenox Industrial Tools 301 at New Hampshire Speedway. This 12×15 black plaque comes with an 8×10 photograph of the race. It also features an acrylic ticket holder to display your ticket.  The product is officially licensed by NASCAR. Overall dimensions are 12×15.

Industrial Maintenance, 1st Edition $137.49 Designed for the “jack of all trades” technician, this unique book covers all five major areas of industrial maintenance knowledge -general, mechanical, electrical, welding, and preventive maintenance- in one complete volume! More than 700 photos and illustrations throughout complement the information that multi-crafted technicians need to know within each of these major subject areas. This book covers everything from basic information on safety, tools, industrial print reading and electrical theory to the inner workings of machinery and equipment so technicians can understand and effectively diagnose, troubleshoot, and provide preventive maintenance on industrial machines. Coverage is comprehensive in nature and is arranged in a modular format to make finding information quick and easy, making this an excellent reference for both the novice and the experienced technician.

Cooper Tools W7BWN 14 1/4 Industrial Offset/Bent Pattern Snips, w/o Grips $42.41 Cooper Tools W7BWN 14 1/4″ Industrial Offset/Bent Pattern Snips, w/o Grips Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell chain, Crescent brand wrenches and pliers, Lufkin measuring tools, Nicholson files and saws, Plumb hammers, H.K. Porter bolt cutters, Weller soldering products, and Wiss snips. Cooper Tools W7BWN 14 1/4″ Industrial Offset/Bent Pattern Snips, w/o Grips Features: Industrial use Offset blades keep hands clear of metal Blades individually hand edged for maximum cutting efficiency Blades of finest quality steel, hot drop-forged for sharp edge long life Rust resistance blades Cuts low carbon cold rolled steel Cooper Tools W7BWN 14 1/4″ Industrial Offset/Bent Pattern Snips, w/o Grips Specifications: UPC Code: 37103213983 Blade Length: 4 in. Tool Length: 14 1/4 in. Cutting Capacity: 18 Gauge Low Carbon Steel Packaging: Industrial Box/Carton Offset blades keep hands clear of metal Industrial use Blades individually hand edged for maximum cutting efficiency Blades of finest quality steel, hot drop-forged for sharp edge long life Rust resistant blades

Cooper Hand Tools Wiss® – Inlaid® Heavy Duty Industrial Shears $34.9 Safety point-bladed shears. Cooper Tools Wiss® shears with hot-drop forged polished blades Made of finest quality cutlery steel Consist of patented SET-EASY® pivot 20SP include safety point blades Product attributes: 12 1/4-in. overall length, 6 1/8-in. cutting length, shear-cut type, made of steel, with polish finish, black handle, weigh 1 lb. Available in 6 pieces per carton or standard pack Made in Colombia

Industrial Visible Storage Cabinet $2910.59 Industrial visible storage cabinets have Plexiglas® doors that allow a visual check of inventory. Cut response time by keeping critical supplies in multiple locations through your facility.Ideal for emergency spill supplies, tools and PPE.Safety center with bright, safety yellow finish is a reminder that emergency response supplies are stocked.Available in yellow or grey. Features include:14-gauge, all-welded construction.Heavy-duty Plexiglass® door inserts.Heavy-duty padlock attachment.Forkliftable base.Cabinets measaure 48″W x 24″D x 82″H.

Lorell Industrial Wire Shelving $78.99 0% 1000 lb 2 2 / Carton 48″ Width x 24″ Depth x 72″ Height 69136 Industrial wire shelving supports up to 1,000 lb. evenly distributed per shelf. Each shelf adjusts in 1″ increments. Shelving is made of steel with a powder-coat finish, 10-gauge shelf surface, 3-gauge frame, and 6-gauge wave pattern. Easy collar-and-sleeve assembly requires no tools. Units can be expanded with use of add-on units and extra shelves. Starter unit includes four shelves and four posts. Add-on unit (sold separately) includes four shelves and two posts. Black China Industrial Wire Shelving Lorell No Shelf Steel www.lorellfurniture.com

Tools Magnetic Storage Cabinet Label $21.39 Magnetic tools storage cabinet labelsillustrate to employees the location of tools storage cabinets throughout the facility. Industrial strength for a tight hold without leaving residue behind. Perforated into 2 parts for use across cabinet doors or other openings. Choose from 2 sizes. Label reads: Tools.

Safco Industrial Wire Shelving $202.99 0% 1 4 4000 lb 48″ Width x 18″ Depth x 72″ Height 5291GR 61 lb Wire shelving includes four shelves, four posts and snap-together clips. Strong welded wire construction with a per shelf capacity of at least 1,000 lb. (with weight evenly distributed). Open wire design permits air circulation and prevents dust accumulation. Shelves adjust in 1″ increments. Unit assembles in minutes without tools. Optional Add-On Unit and Extra Shelf Pack meet specific requirements and are sold separately. GREENGUARD Gray Industrial Wire Shelving No Powder Coated Safco Safco Products Shelf Yes www.safcoproducts.com

PC Tools Internet Security $49.95 Umfassender Schutz für Sie, Ihre Familie und Ihren PC vor Bedrohungen aus dem Internet.

Concrete Pavement Design, Construction, and Performance $140 Addressing the interactions between the different design and construction variables and techniques this book illustrates best practices for constructing economical, long life concrete pavements. The book proceeds in much the same way as a pavement construction project. First, different alternatives for concrete pavement solutions are outlined. The desired performance and behaviour parameters are identified. Next, appropriate materials are outlined and the most suitable concrete proportions determined. The design can be completed, and then the necessary construction steps for translating the design into a durable facility are carried out. Although the focus reflects highways as the most common application, special features of airport, industrial, and light duty pavements are also addressed.Use is made of modeling and performance tools such as HIPERPAV and LTPP to illustrate behavior and performance, along with some case studies. As concrete pavements are more complex than they seem, and the costs of mistakes or of over-design can be high, this is a valuable book for engineers in both the public and private sectors.

Ryan Newman Sublimated 12×15 Plaque / Details: 2011 New Hampshire Lenox Industrial Tools 301, I WAS THERE $44.99 Commemorate Ryan Newman’s victory during the 2011 Lenox Industrial Tools 301 at New Hampshire Speedway. This 12×15 black plaque comes with an 8×10 photograph of the race. It also features an acrylic ticket holder to display your ticket. ?The product is officially licensed by NASCAR. Overall dimensions are 12×15.

*G* Union Tools 44106/AS248 9-1/4 x 11-1/2 Steel Collar Square Point Shovel $20.37 OQW1155: This item features: -For transferring sandy, light soils. -Rolled step prevents material build-up. -For transferring heavy, loose material. -Largest open-back industrial blade. -For transferring rocky & drier soils. -Dura-Torque crimp collar for super-strong head-to-handle connection. -Solid fiberglass handle for the toughest jobs. -Exclusive Razor-Back backbone design that provides a ribbon of steel along the length of the frog and socket for maximum reinforcement at the most critical stress point. -Crimped steel collar strengthens handle to socket connection. -For transferring heavy, rocky materials. -Fiberglass handle is 40% stronger than wood. -For transferring heavy soil and other materials. -Crimped steel collar strengthens the handle to socket connection. -Blade No.: #2. -Blade Tip Shape: Square Point. -Blade Material: Steel. -Price is for 1 Each. Model Code  Model Description AABrand Name:Razor-Back , Blade Type:Closed-Back, Forward Turn Step, Blade Length:12 in, Blade Width:9 1/2 in, Handle Length:48 in, Handle Type:Straight, 9-1/2 Cushion End, Handle Material:Fiberglass ABBrand Name:Razor-Back , Blade Type:Closed-Back, Forward Turn Step, Blade Length:12 in, Blade Width:9 1/2 in, Socket Length:11 in, Handle Length:48 in, Handle Type:Straight, Handle Material:White Ash ACBrand Name:Razor-Back , Blade Type:No Step, Blade Length:11 1/4 in, Blade Width:9 3/4 in, Socket Length:10 in, Handle Length:47 in, Handle Type:Straight, Handle Material:White Ash ADBrand Name:Razor-Back , Blade Type:Open-Back, Forward Turn Step, Blade Length:12 in, Blade Width:9 1/2 in, Socket Length:11 in, Handle Length:30 in, Handle Type:D-Grip, Handle Material:White Ash, Steel AEBrand Name:Razor-Back , Blade Type:Open-Back, Forward Turn Step, Blade Length:12 in, Blade Width:9 1/2 in, Socket Length:11 in, Handle Length:48 in, Handle Type:Straight, Handle Material:Fiberglass AFBrand Name:Razor-Back , Blade Type:Open-Back, Forward Turn Step, Blade Length:12 in, Blade

*G* Union Tools 45657/R2CB48S 9-1/2 x 12 Razorback Point Shovel $37.94 For Digging And Excavation In Hard, Rocky Soil.Closed-Back Industrial Gauge Tempered Steel Blade With Forward Turned Step.11 Inch Extended Tab Socket To Reduce Handle Breakage.48 Inch Premium Northern White Ash Handle.

.Copic Original Markers: 12 Color Papercrafting Set [Basic Brights] $62.91 Copic Original Markers: 12 Color Papercrafting Set [Basic Brights]Colors Included: 0-C Colorless Blender, B05, R29, YR04, Y06, G07, E37, BV08, BG49, RV04, V06, V17Copic CSTAMP12B Papercrafting Original marker set in Basic Bright colors. The original line of high-quality illustrating tools used for decades by professionals around the world. Preferred for architectural design, product rendering, and other forms of industrial design, they are also popular for use with models, ceramics, crafts, scrapbooking, other papercrafts. Copic markers are ideal for all calligraphy, airbrushing, and graphic arts needs. The broad nib offers smooth, consistent coverage for larger areas, while the fine nib allows for easy detail work. Photocopy-safe and guaranteed color consistency. Compatible with the Copic Airbrush System. Markers are refillable, available in over 200 colors, and have a variety of nib options. Color choice is expandable to include the entire selection by purchasing Various Ink refills and empty markers. Alcohol-based ink dries acid-free. Includes plastic storage case. Set of 12 Basic colors as shown. Copic CSTAMP12B Papercrafting colored art markers.

.Copic Original Markers: 12 Color Papercrafting Set [Earthy Elements] $62.91 Copic Original Markers: 12 Color Papercrafting Set [Earthy Elements]Colors Included: E35, B45, R59, RV34, BV04, V12, Y21, B00, YG67, G21, E29, W3Copic CSTAMP12E Papercrafting Original marker set in Earthy Elements colors. The original line of high-quality illustrating tools used for decades by professionals around the world. Preferred for architectural design, product rendering, and other forms of industrial design, they are also popular for use with models, ceramics, crafts, scrapbooking, other papercrafts. Copic markers are ideal for all calligraphy, airbrushing, and graphic arts needs. The broad nib offers smooth, consistent coverage for larger areas, while the fine nib allows for easy detail work. Photocopy-safe and guaranteed color consistency. Compatible with the Copic Airbrush System. Markers are refillable, available in over 200 colors, and have a variety of nib options. Color choice is expandable to include the entire selection by purchasing Various Ink refills and empty markers. Alcohol-based ink dries acid-free. Includes plastic storage case. Set of 12 earth tone colors as shown. Copic CSTAMP12E Papercrafting Earthy Elements colored art markers.

.Copic Original Markers: 12 Color Papercrafting Set [Soft Pastels] $62.91 Copic Original Markers: 12 Color Papercrafting Set [Soft Pastels]Colors Included: B02, BG10, BV00, BV23, E00, E33, G02, R32, RV21, V15, Y02, YR02Copic CSTAMP12P Papercrafting Original marker set in soft pastel colors. The original line of high-quality illustrating tools used for decades by professionals around the world. Preferred for architectural design, product rendering, and other forms of industrial design, they are also popular for use with models, ceramics, crafts, scrapbooking, other papercrafts. Copic markers are ideal for all calligraphy, airbrushing, and graphic arts needs. The broad nib offers smooth, consistent coverage for larger areas, while the fine nib allows for easy detail work. Photocopy-safe and guaranteed color consistency. Compatible with the Copic Airbrush System. Markers are refillable, available in over 200 colors, and have a variety of nib options. Color choice is expandable to include the entire selection by purchasing Various Ink refills and empty markers. Alcohol-based ink dries acid-free. Includes plastic storage case. Set of 12 pastel colors as shown. Copic CSTAMP12P Papercrafting Soft Pastels colored art markers.

.Gray Ink Pro Liner Kit $51.6 Gray Ink Pro Liner KitThis is the ultimate gray rendering kit. The Gray Ink Pro is ideal for storyboard artists, industrial designers or anyone who likes to make renderings in shades of gray. It contains 1 Wide marker, 3 Sketch markers from our cool gray blending family and a gray Various Ink refill bottle, 2 gray multiliner SP?s (0.3 and brush) 1 black multliliner SP (0.3) and 2 SP refill cartridges (gray and black). All contained in a black book style case with an extra slot for your own pencil or pen. If you want a complete set of gray rendering tools then look no further that the Gray Ink Pro.Wallet Dimensions: 5.25? x 7.5? x 2?

0.024 MIG Wire – 10 Pound Spool $40.99 CHP1687: Campbell Hausfeld is a leader in welders and accessories for all your industrial and automotive needs. Stock up on MIG welding wire with these 10 pound spools of steel wire. Buy in bulk to ensure you have plenty when you need it. For quality tools and accessories, use Campbell Hausfeld. Features: -0.024 steel wire -10 pound spool Specifications: -Warranty: 1 year limited -Weight: 10.7 lbs -Dimensions: 2.5 H x 8.19 W x 8.19 L

0.030 Aluminum MIG Wire $19.99 CHP1684: Campbell Hausfeld is a leader in welders and accessories for all your industrial and automotive needs. Replenish your MIG welders with this .030 aluminum wire. Buy in bulk to ensure you have plenty when you need it. For quality tools and accessories, use Campbell Hausfeld. Specifications: -0.030 aluminum wire -Weight: 1.43 lbs -Dimensions: 5.2 H x 4.15 W x 1.9 L

1-5/8X6IN DIAMOND HONING BLOCK $12.75 Made of tiny industrial diamonds. Ideal for razor sharp edge on your maintained knives and tools. Lubricate with water before use.

10 HALF RD BASTARD FILE $14.09 Apex Tool Group LLC based in Sparks MD is one of the largest worldwide producers of industrial hand and power tools tool storage drill chucks chain and electronic soldering products. Used on concave #44; cinvex and flat surfaces. Rounded on 1 side #44; flat on opposite . Backs of all half-round bastard files are double-cut . Backs of all 4 and 6 quot; files are single-cut . Backs of all half-round second-cut files are longer than 6 quot; are double-cut

1992 Ford Bronco Battery Cable Motorcraft Ford Battery Cable WC8979 $37.89 Motorcraft Battery Cable – 1992-1992 Ford Bronco 1992 – 1992 Michigan Industrial Tools Worklight MIT6122

20 Deep Modular Training Table – Color: Graphite with black base, Depth: 24 $239.22 OF1089: This modular utility table had a sleek style that looks great in any office, or group multiple desks together to create a training room environment. The industrial strength scratch-resistant steel frame will still look great after heavy use. Innovative snap lock technology makes assembly very easy — with no tools required! Features: – Quick Connect assembly – no tools required! -Thermofused melamine finish -Scratch resistant powder coated paint finish -Graphite has T-mold edge banding -Maple has self edge banding -Adjustable gliders -Durable steel base and frame -55 x 20 tabletop -Overall Dimensions: 29.5 H x 55 W x 20 – 24 D

20 Deep Modular Training Table – Color: Maple with gray base, Depth: 20 $212.16 OF1089: This modular utility table had a sleek style that looks great in any office, or group multiple desks together to create a training room environment. The industrial strength scratch-resistant steel frame will still look great after heavy use. Innovative snap lock technology makes assembly very easy — with no tools required! Features: – Quick Connect assembly – no tools required! -Thermofused melamine finish -Scratch resistant powder coated paint finish -Graphite has T-mold edge banding -Maple has self edge banding -Adjustable gliders -Durable steel base and frame -55 x 20 tabletop -Overall Dimensions: 29.5 H x 55 W x 20 – 24 D

20 Deep Modular Training Table – Color: Maple with gray base, Depth: 24 $239.22 OF1089: This modular utility table had a sleek style that looks great in any office, or group multiple desks together to create a training room environment. The industrial strength scratch-resistant steel frame will still look great after heavy use. Innovative snap lock technology makes assembly very easy — with no tools required! Features: – Quick Connect assembly – no tools required! -Thermofused melamine finish -Scratch resistant powder coated paint finish -Graphite has T-mold edge banding -Maple has self edge banding -Adjustable gliders -Durable steel base and frame -55 x 20 tabletop -Overall Dimensions: 29.5 H x 55 W x 20 – 24 D

2005-2006 Ford Expedition TPMS Sensor Motorcraft Ford TPMS Sensor TPMS-2 $72.57 Motorcraft TPMS Sensor – 2005-2006 Ford Expedition 2005 – 2006 Michigan Industrial Tools Punch Set MIT6588

2007 NASCAR Nextel Cup Races: 2007 Daytona 500, 2007 Crown Royal Presents the Jim Stewart 400, 2007 Dodge Avenger 500 $27.18 Purchase includes free access to book updates online and a free trial membership in the publisher”s book club where you can select from more than a million books without charge. Chapters: 2007 Daytona 500, 2007 Crown Royal Presents the Jim Stewart 400, 2007 Dodge Avenger 500, 2007 Allstate 400 at the Brickyard, 2007 Aaron”s 499, 2007 Subway Fresh Fit 500, 2007 Auto Club 500, 2007 Lenox Industrial Tools 300, 2007 Samsung 500, 2007 Chevy Rock

230V MIG / Flux Core Wire Feed Welder $647.99 CHP1908: MAXUS MXW41300AV MIG/Flux Welder by Campbell Hausfeld. MAXUS tools and equipment are designed for people who make their living using tools on the job site. Maxus Welders and equipment are designed to help pros like you be more productive on the job. We want to help you finish your jobs faster and easier all day, every day. Features: -Professional 10ft Torch and Ground Leads -230 Volts – MIG ready wire feed -Perfect for metal fabrication, auto/shop repairs, and industrial maintenance -The 5 heart settings provide precise adjustment freedom to accommodate the thickness of your metal -The professional cold torch with trigger activated arc allows precise weld placement -The Ready-To-Run Kit includes everything you need to weld right out of the box -Includes an incredable accessory kit: Welding Helmet, Gloves, Dual Gauge Regulator, Two Contact Tips, Flux Wire, Chipping Hammer with Brush. -5 Year Limited Warranty Specifications: -Input: 230 Volts -Welds Steel from 24 gauge to 5/16 -Welder weight: 78 lbs -Dimensions: 16.75 H x 15.25 W x 31 L

25 Phillips Bits x 1 + Magnetholder $19.8 Felo 53543 – Phillips Bits. 25 x 1 Phillips Bits and MagnetHolder. Set Includes Sizes: PH1 (x5), PH2 (x15), PH3 (x5) Precision tips for heavy-duty use manufactured from long-lasting steel, Made in Germany, Industrial bits ensure high performance and exacting precision, Lifetime warranty – we will replace it free of charge. Precision tools for heavy-duty use, manufactured from long-lasting steels. Superior hardness and torque, exceeding DIN and ISO requirements. Comprehensive range. Extra precision achieved by profilated not pressed- bits. Clearly defined quality standards and complete documentation by our ISO 9001 and QS 9000

26 top chest $158.33 This 26 Inch Tool Storage Chest by Excel International has six ball bearing slide drawers and a retractable, locking cover to organize your tools and parts while keeping them safe. Constructed of cold rolled steel, the tool box features an industrial powder coat paint finish and EVA drawer liners. A perfect storage solution for garages, shops and tool sheds! Assembly level/degree of difficulty: No Assembly Required.

2900 watts, 5.5 HP Generator $1123.59 TSU1021: The TPG3 series of generators are designed to withstand the severe conditions of construction jobsites or industrial applications, especially where extra durability and dependable, stable power are required. Ideal for supplying the power to Tsurumi’s single-phase submersible pumps and all of your electrical power tools such as drills, saws, lighting and heaters. Features: -Powered by Honda OHV engine for efficient fuel and oil consumption with oil alert system to shut off motor oil falls below safe operating level -Large air filter for superior emission control -Rubber vibration pads isolate generator/engine set for maximum protection and noise reduction -Auto Idle Control Switch on Control Panel -High Capacity Fuel Tank with Fuel Gauge for extended run time Specifications: -Max./Rated Output: 2800/2400 watts -Max./Rated Current (120V, 240V): 23.3/20 -Voltage: 120 (60 Hz, 1 phase) -Engine Model: GX160 U1VES6 -Max. HP: 5.5 -RPM: 3600 -Displacement: 163 (10inch3) -Fuel Tank Capacity: 4.2 gallons -Running Time(Rated Load, 1/2 load): 12.1 hrs -Starting System: Recoil -Noise Level (Rated Load): 64 dB -Weight:102.5 lbs -Overall Dimensions: 19.75 H x 16.5 W x 23.5 D Warranty Tsurumi’s limited 2 year warranty. Warranty evaluations will be done within 2 days after receipt by Tsurumi’s Authorized Repair Center.

2ft Standard Rule $41.39 Apex Tool Group LLC based in Sparks MD is one of the largest worldwide producers of industrial hand and power tools tool storage drill chucks chain and electronic soldering products. 1 fold #44; tempered steel rule . Converts diameters directly to circumference measurements . Riveted joint with stop when ruler is opened straight . Black filled etched graduations

3 Drill Bit Pin Vise Chuck Set + 3 Mandrels $10.99 Set of 6pc Adapter Rotary Tools and Mandrels 3pcs Set of Drill Bit Vise Chuck Tool, This is a pin chuck set for your rotary tool machine (NOT for Dremel) NOTE: the shank size on this black set is NOT 1/8 , see picture prior to ordering This tool can hold a variety of files, burs, drill bits, saw blades, reamers and more This tool comes in a protective storage This tool comes with 3 collets as follows: One collet is 1mm and measures approximately 15/16 x 5/16 One collet is 2mm and measures approximately 15/16 x 5/16 One collet is 3mm and measures approximately 2 1/16 x 1/2 3pcs 1/8 Shank 1/4 Arbor Mandrels, Factory Sealed This set contains 3 mandrels (chrome color) for your Dremel machine NOTE: the shank size on this silver color set is 1/8 , see picture prior to ordering These can be used with various sanding discs These are perfect for jewelers, metalsmiths, gunsmiths, locksmiths, and other professions These can work with any Dremel tool or drill of 1/8 shank These can hold any accessory that requires 1/4 arbor *IMPORTANT* note: the 3 black shafts do NOT fit Dremel, for Industrial Rotary Tool Machinary or Adjustable Drill Head only)

3-Shelf Heavy Duty Steel Welded Rack $239 This 3-Shelf Heavy Duty Steel Welded Rack features industrial grade welded steel frames and beams, offering a weight capacity of up to 1,200 lbs. per shelf (evenly distributed loads). This metal shelving unit has three shelves that are height adjustable in 3 increments and feature durable particleboard tops. A black textured finish on these industrial shelves conceals dirt and grime, making them a great choice for the garage, shed or warehouse! Dual locking system in posts. No tools, nuts or bolts required for assembly. Made in the USA! Made in America. Assembly level/degree of difficulty: Easy.

3.6 General Tools Seeker Video Inspection System – Wireless Pipe Drain Recordable Micro $149.99 Our Wireless Recordable Inspection Camera allows for remote inspection of areas generally inaccessible to the naked eye. The Wireless Camera comes with a distal video camera at the end of a 3 ft shaft for internal inspection of engines, A/C systems, interior structures of walls, and other industrial and similar applications. The Wireless Inspection Camera display is clear, even in moderately bright light and, since there is no focus adjustment to fiddle with, you just point and shoot. Imaging and illumination is provided by a full color image sensor and dual solid state Led’s which are controlled by an easy to use rolling switch. The 3.5 full color LCD screen allows the user to view live video from the lens. The hand held unit is powered by 4-AA batteries. The Video Monitor is powered by rechargeable batteries that are already installed in the unit. They just need to be charged. (AC adapter is included) Accessory Mirror allows user to see 90 degrees to axis of the shaft. The Magnet accessory will pick up approx 1/4 lb and a hook is also provided for hard to retrieve items. It can also support video recording, Media type Micro SD card UP to 12 Gig(SD Card is not include.) Output Media is AVI for Videos and Jpg for Snapshots – AVI can normally be played by Windows media player and Jpg is a common file format used and can be viewed in Windows. Software is included for viewing the images. It is packed on a mini disc and is compressed in a RAR file if you want to try to use it. We have not tested it since the file formats are standard.

300 Welder/Generator One-Pak Lunette Eye Hitch And Trailer Package With Combination Ball And Eye Hitch With 24HP Deutz Engine, 12500 Watts Peak, 300 Amp $14956.99 LCL1160: Features: -Price Is For One Each -Minimum Order Of 1. -The Vantage 300 is an ideal choice for construction teams, pipe rig owners and rental fleet managers. Housed in a compact, corrosion resistant stainless steel case, this rugged welder/generator features Lincoln Chopper Technology to deliver great arc starts and a smooth arc for stick, TIG or wire welding. The quiet, smooth-running 1800 rpm water-cooled 4-cylinder Kubota or Deutz diesel engine generates 12,500 watts of 3 Phase or 11,500 watts of 1 Phase auxiliary power. And, it s loaded with convenience features you ll wish you had on your last welder! It all adds up top arc performance, a smooth reliable engine, plenty of auxiliary power, compact case and tough materials that are built to last!.-COMBINATION HITCH.-Compact Case With Stainless Steel Enclosure – small size and light weight is suitable for many pickup trucks. Standard stainless steel roof, side panels and engine-access door deliver added protection and durability. Multi-Process Welding, Simple to Operate – select one of four Process Models, including CC-Stick {up to 1/4 }, Downhill Pipe {for stick}, Touch-Start TIG or CV-Wire {up to 3/32 }, and then dial in the desired output. Plenty of AC Generator Power – 12.5 kW peak {11 kW continuous} 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder – 11.5 kW peak {10kW continuous} 1-phase AC generator power for common construction tools. Arc Gouging – with up to 1/4 carbons Reliable Engines – 4 cylinder 1800 RPM Kubota or Deutz diesel engines run smooth and quiet – standard engine gauges allow you to monitor performance at a glance. Innovative Service Access – lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck – 55% more access than competitive product – battery drawer on front of machine and top-mounted radiator cover provide co

300 Welder/Generator Ready-Pak Lunette Eye Hitch And Trailer Package With Combination Ball And Eye Hitch With 24HP Deutz Engine, 12500 Watts Peak, 300 Amp $14889.99 LCL1162: Features: -Price Is For One Each -Minimum Order Of 1. -The Vantage 300 is an ideal choice for construction teams, pipe rig owners and rental fleet managers. Housed in a compact, corrosion resistant stainless steel case, this rugged welder/generator features Lincoln Chopper Technology to deliver great arc starts and a smooth arc for stick, TIG or wire welding. The quiet, smooth-running 1800 rpm water-cooled 4-cylinder Kubota or Deutz diesel engine generates 12,500 watts of 3 Phase or 11,500 watts of 1 Phase auxiliary power. And, it s loaded with convenience features you ll wish you had on your last welder! It all adds up top arc performance, a smooth reliable engine, plenty of auxiliary power, compact case and tough materials that are built to last!.-PACKAGE COMBINATION HITCH.-Compact Case With Stainless Steel Enclosure – small size and light weight is suitable for many pickup trucks. Standard stainless steel roof, side panels and engine-access door deliver added protection and durability. Multi-Process Welding, Simple to Operate – select one of four Process Models, including CC-Stick {up to 1/4 }, Downhill Pipe {for stick}, Touch-Start TIG or CV-Wire {up to 3/32 }, and then dial in the desired output. Plenty of AC Generator Power – 12.5 kW peak {11 kW continuous} 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder – 11.5 kW peak {10kW continuous} 1-phase AC generator power for common construction tools. Arc Gouging – with up to 1/4 carbons Reliable Engines – 4 cylinder 1800 RPM Kubota or Deutz diesel engines run smooth and quiet – standard engine gauges allow you to monitor performance at a glance. Innovative Service Access – lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck – 55% more access than competitive product – battery drawer on front of machine and top-mounted radiator cover pr

3469B Tuff-Lite Soft Padded Equipment Case: 5 H x 12 W x 14 D $97.99 CE1087: Light in weight but strong in construction, the 3469B Tuff-Lite Soft Padded Equipment Case is a safe and convenient way to carry equipment. Made with 1680 denier Kevlistic, this case is built to be tough. Handles are wrapped for comfort and a shoulder strap is provided for easy carrying. Features: -Top grade materials and workmanship -Made with 1680 denier Kevlistic -Light in weight -Wrapped handles -Shoulder strap Specifications: -Dimensions of Case: 5 H x 12 W x 14 D -Color: Black About C.H. Ellis C. H. Ellis manufactures a wide range of high-quality industrial cases made in Indianapolis, IN. C.H. Ellis makes and supplies cases for a wide variety of applications. Their carrying or shipping cases are for tools, medical instruments, equipment, spare parts, circuit boards, samples, and demonstration. C.H. Ellis also makes portable enclosures for test sets, medical, measurement, communications, broadcast and scientific equipment, and belt pouches to mobile equipment racks, as well as static control products. Experience, together with dedication to customer satisfaction, is the key to their success. C. H. Ellis was formed in 1902, at which time we were manufacturing harnesses and saddles for horses. Since then, Ellis has adapted to the changing needs of industry and now manufactures products to meet the needs of high technology industries. Most of the products are now manufactured from manmade materials such as Polyethylene, ABS, Polystyrene, Cordura and nylon. From the very first commercially available organized attach tool case until today, C.H. Ellis’ design engineers have been providing innovative solutions for portable protection and organization applications leading to an impressive list of firsts and a reputation as industry leaders in innovation and quality. C.H. Ellis’ extensive use of Computer Aided Drafting (CAD) ensures that their processes and technology are abreast of the time and meet your needs in the most professional manner.

3710 High Capacity Large Wing Tool Pallet Set: 2 1/2 H x 17 W x 14 D $89.99 CE1074: The 3710 High Capacity Wing Tool Pallet Set, which includes a top pallet, wings, and a bottom pallet, is made with top grade materials and workmanship. Novalux flocked vinyl tool pockets make it stronger over a wide range of temperatures, and rivets at the stress points have greater pull-through resistance. Built for long life, the pallets are designed to hold and organize up to 86 tools, and are recommended for 14 cases. Features: -Top grade materials and workmanship -Novalux flocked vinyl tool pockets -Rivets at stress points -Holds and organizes up to 86 tools -Top, Wings, and Bottom Pallets -Fits in cases compatible with large pallets Specifications: -Dimensions of Pallets: 2 1/2 H x 17 W x 14 D -Color: Black About C.H. Ellis C. H. Ellis manufactures a wide range of high-quality industrial cases made in Indianapolis, IN. C.H. Ellis makes and supplies cases for a wide variety of applications. Their carrying or shipping cases are for tools, medical instruments, equipment, spare parts, circuit boards, samples, and demonstration. C.H. Ellis also makes portable enclosures for test sets, medical, measurement, communications, broadcast and scientific equipment, and belt pouches to mobile equipment racks, as well as static control products. Experience, together with dedication to customer satisfaction, is the key to their success. C. H. Ellis was formed in 1902, at which time we were manufacturing harnesses and saddles for horses. Since then, Ellis has adapted to the changing needs of industry and now manufactures products to meet the needs of high technology industries. Most of the products are now manufactured from manmade materials such as Polyethylene, ABS, Polystyrene, Cordura and nylon. From the very first commercially available organized attach tool case until today, C.H. Ellis’ design engineers have been providing innovative solutions for portable protection and organization applications leading to an impressive list of firsts and a reputation a

4 Extra Hard 1 Phillips Power Bit With 1/4 Hex Shank And Rounded Body $2.99 OCB1205: Features: -Price Is For One Each -Minimum Order Of 1. -Magna Industrial Screwdriver Bits are manufactured using a Statistical Process Control. This means bits are monitored through every stage of production to ensure that every bit can stand up to tough industrial condtions. Other tests conducted by our Corporate Engineering Staff are Torque, which measures in inch pounds, the pressure a bit will take before it breaks. While Cycle is the test conducted to show how long a bit will last at a controlled torque and measured by how many screws can be driven by one bit. Magna is the worlds largest manufacturer of screwdriver bits and strives to keep this position by delivering quality bits..-4IN LONG 3-1/16 BODY DIA #1.-Cold formed for optimum toughness and resistance to wear Most widely used style Many configurations and hardnesses. -UNSPC CODE: 27112700. -Screwdriver Bit Tips Screwdriver Bit Tips cutting tool tools screwdrivers bits tip Screw Driver Bits Screw Driver Bit Tips.-BIT PHILLIPS PWR 1-4IN SHANK.

4 Narrow Face Crimped Steel Wire Wheel For Small Angle Grinders $13.77 ORI2089: Features: -Price Is For One Each -Minimum Order Of 1. -Weilers range of small angle grinder brushes leads the industry in performance and reliability. The product line consists of wheel, cup and bevel brushes which have been specifically designed for use on high speed tools. All of the brush types in the Mighty-Mite offering are available in heat-treated steel and Type 302 stainless steel. Choose from crimped wire for flexibility and light-duty applications or knot wire for more aggressive brushing action..-WEILER BRUSH.-Weiler brushes are designed for industrial use. These quality brushes are made with the finest materials, yet priced to give the lowest cost-per-use.. -UNSPC CODE: 31171805.-Brush Type:Knot Type. -http://www.airgas.com/documents/pdf/msds/w/wb_weiler brush/wb-carbon steel wire msds.pdf.-Power Tool Brushes Power Tool Brushes tools wire brush.-TLNA-4 WIRE WHEEL CRIMP.

4 Standard Twist Knot Stainless Steel Wire Wheel Brush With 5/8 – 11 UNC Arbor Hole For Small Angle Grinders $29.1 ORI2093: Features: -Price Is For One Each -Minimum Order Of 1. -Weilers range of small angle grinder brushes leads the industry in performance and reliability. The product line consists of wheel, cup and bevel brushes which have been specifically designed for use on high speed tools. All of the brush types in the Mighty-Mite offering are available in heat-treated steel and Type 302 stainless steel. Choose from crimped wire for flexibility and light-duty applications or knot wire for more aggressive brushing action..-WEILER BRUSH.-Weiler brushes are designed for industrial use. These quality brushes are made with the finest materials, yet priced to give the lowest cost-per-use.. -UNSPC CODE: 31171805.-Brush Type:Knot Type. -http://www.airgas.com/documents/pdf/msds/w/wb_weiler brush/wb-stainless steel msds.pdf.-Power Tool Brushes Power Tool Brushes tools wire brush.-STA-4 SS WIRE WHEEL KNOT.

4 Standard Twist Knot Steel Wire Wheel Brush With 5/8 – 11 UNC Arbor Hole For Small Angle Grinders $14.14 ORI2096: Features: -Price Is For One Each -Minimum Order Of 1. -Weilers range of small angle grinder brushes leads the industry in performance and reliability. The product line consists of wheel, cup and bevel brushes which have been specifically designed for use on high speed tools. All of the brush types in the Mighty-Mite offering are available in heat-treated steel and Type 302 stainless steel. Choose from crimped wire for flexibility and light-duty applications or knot wire for more aggressive brushing action..-WEILER BRUSH.-Weiler brushes are designed for industrial use. These quality brushes are made with the finest materials, yet priced to give the lowest cost-per-use.. -UNSPC CODE: 31171805.-Brush Type:Knot Type. -http://www.airgas.com/documents/pdf/msds/w/wb_weiler brush/wb-carbon steel wire msds.pdf.-Power Tool Brushes Power Tool Brushes tools wire brush.-STA-4 WIRE WHEEL KNOT.

4 Stinger Bead Twist Knot .020 Stainless Steel Wire Wheel With 5/8 – 11 UNC Arbor Hole For Small Angle Grinders $18.44 ORI2098: Features: -Price Is For One Each -Minimum Order Of 1. -Weilers range of small angle grinder brushes leads the industry in performance and reliability. The product line consists of wheel, cup and bevel brushes which have been specifically designed for use on high speed tools. All of the brush types in the Mighty-Mite offering are available in heat-treated steel and Type 302 stainless steel. Choose from crimped wire for flexibility and light-duty applications or knot wire for more aggressive brushing action..-WEILER BRUSH.-Weiler brushes are designed for industrial use. These quality brushes are made with the finest materials, yet priced to give the lowest cost-per-use.. -UNSPC CODE: 31171805.-Brush Type:Stringer Bead Twist. -http://www.airgas.com/documents/pdf/msds/w/wb_weiler brush/wb-stainless steel msds.pdf.-Power Tool Brushes Power Tool Brushes tools wire brush.-STBA432SS WIRE WHEEL 4 S/B.

4 Stinger Bead Twist Knot .020 Steel Wire Wheel With 5/8 – 11 UNC Arbor Hole For Small Angle Grinders $9.39 ORI2099: Features: -Price Is For One Each -Minimum Order Of 1. -Weilers range of small angle grinder brushes leads the industry in performance and reliability. The product line consists of wheel, cup and bevel brushes which have been specifically designed for use on high speed tools. All of the brush types in the Mighty-Mite offering are available in heat-treated steel and Type 302 stainless steel. Choose from crimped wire for flexibility and light-duty applications or knot wire for more aggressive brushing action..-WEILER BRUSH.-Weiler brushes are designed for industrial use. These quality brushes are made with the finest materials, yet priced to give the lowest cost-per-use.. -UNSPC CODE: 31171805.-Brush Type:Stringer Bead Twist. -http://www.airgas.com/documents/pdf/msds/w/wb_weiler brush/wb-carbon steel wire msds.pdf.-Power Tool Brushes Power Tool Brushes tools wire brush.-STBA432 WIRE WHEEL 4 S/B.

4-Shelf Industrial Wire Unit – 36 x 24 – Silver $178 OF1156: This 72 H shelving unit is customizable for your storage needs. Perfect for Hotels, Warehouses, Restaurants, Offices, Institutions, and Homes. Its excellent 300 lbs capacity per shelf is more than enough for most needs. Features: -Unit comes with 4 shelves, 4 posts, adjustable glides, and shelf mounting clips -No tools required for assembly -Includes all mounting hardware -1 diameter steel posts -Designed and built for commercial use -300 lb shelf capacity -Customize shelf assembly in 1 increments -Available in black or silver -Includes 4 hooks for linking to other units -Overall Dimensions: 72 H x 36 W or 48 W x 24 D

41 top chest $376.59 This Rolling Tool Cabinet by Excel International turns your garage or work shed into a highly organized and efficiently functioning space! Twelve drawers and one divided cabinet give you versatility when sorting tools and parts. The rolling tool box also features a lockable storage compartment on top, double ball bearing slides on the deep drawers, and EVA drawer liners. Constructed from cold rolled steel, this tool chest has an industrial powder coat paint finish and 5 x 2 casters. Assembly level/degree of difficulty: Easy.

4500 watts, 8 HP Honda Engine Driven Generator $1596.19 TSU1022: The TPG3 series of generators are designed to withstand the severe conditions of construction jobsites or industrial applications, especially where extra durability and dependable, stable power are required. Ideal for supplying the power to Tsurumi’s single-phase submersible pumps and all of your electrical power tools such as drills, saws, lighting and heaters. Features: -Automatic idle control reduces fuel consumption, noise, and engine wear -Powered by Honda OHV engine for efficient fuel and oil consumption with oil alert system to shut off motor oil falls below safe operating level -Large air filter for superior emission control -Rubber vibration pads isolate generator/engine set for maximum protection and noise reduction -Auto Idle Control Switch on Control Panel -High Capacity Fuel Tank with Fuel Gauge for extended run time Specifications: -Max./Rated Output: 4500/3600 watts -Max./Rated Current (120V, 240V): -120V: 37.5/30 -240V: 18.8/15 -Voltage: 120/240 (60 Hz) -Engine Model: GX240 U1EDT6 -Max. HP: 8 -RPM: 3600 -Displacement: 242 (15 inch3) -Fuel Tank Capacity: 6.8 gallons -Running Time(Rated Load, 1/2 load): 12.5 hrs -Starting System: Recoil -Noise Level (Rated Load): 68 dB -Weight: 157lbs -Overall Dimensions: 20.25 H x 21.25: W x 27.16 D Warranty Tsurumi’s limited 2 year warranty. Warranty evaluations will be done within 2 days after receipt by Tsurumi’s Authorized Repair Center.

48774 Knife Set $12.67 Apex Tool Group LLC based in Sparks MD is one of the largest worldwide producers of industrial hand and power tools tool storage drill chucks chain and electronic soldering products. For a wide range of cutting operations